DWRS-125G Dual Wall Flame Retardant Retardant Lined Heat Shrink Tubing
DWRS-125G(3X)(4X) ke tšupu ea polyolefin e amanang le sefapano e pharalletseng ka lera le ka hare la sekhomaretsi. Lera le ka hare la sekhomaretsi, le nang le bokhoni bo phahameng ba ho tiisa, hape ke tšireletso khahlanong le khatello ea mochini. Li-tubing tse peli tsa mocheso tse fokotsang mocheso li etselitsoe ho fana ka tiiso e phahameng khahlanong le metsi, khase e senyang le lik'hemik'hale.
Sebopeho
Ts'ebetso ea Setsebi
Thepa | Lintlha tse tloaelehileng | Mokgwa/boemo ba teko |
Matla a tšepe | ≥12MPa | ASTM D2671 |
Elongation nakong ya khefu | ≥400% | ASTM D2671 |
Matla a thata ka mor'a ho tsofala ha mocheso | ≥11MPa | 158℃ ×168h |
Ho lelefatsa ka mora botsofali ba mocheso | ≥350% | 158℃ ×168h |
Phetoho ea longitudinal | 0~+10% | ASTM D2671 |
Ho chesa | Ho itima ka bowena ka metsotsoana e 30. | AMS-DTL-23053/4 |
Matla a dielectric | ≥15kV/mm | IEC 60243 |
Ho hanyetsa molumo | ≥1014Ω.cm | IEC 60093 |
Ts'ebetso ea Teknoloji ea Sekhomaretsi
Ts'ebetso ea Teknoloji ea Sekhomaretsi
Thepa | Lintlha tse tloaelehileng | Mokgwa/boemo ba teko |
Ntho e nolofatsang | 95±5°C | ASTM E28 |
Ho monya metsi | <0.5% | ASTM D570 |
Matla a peel (PE) | ≥120N/25mm | ASTM D 1000 |
Matla a peel (AI) | ≥80N/25mm | ASTM D 1000 |
Ts'ebetso ea Teknoloji ea Sekhomaretsi
Boemo
Boholo(mm) | Joalokaha ho fanoe ka D(mm) | Ka mor'a ho hlaphoheloa ka ho feletseng (mm) | Sephutheloana se Tloaelehileng |
Bophara ba ka hare d | Botenya ba lebota w1 | Botenya ba lera la sekhomaretsi w2 | (M/Roll kapa M/PCS) |
Φ3.2 | ≥3.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ4.8 | ≥4.8 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ6.4 | ≥6.0 | ≤2.00 | ≥1.00 | 0.50 | 100 |
Φ7.9 | ≥7.9 | ≤2.70 | ≥1.30 | 0.50 | 100 |
Φ9.5 | ≥9.0 | ≤3.00 | ≥1.40 | 0.60 | 50 |
Φ12.7 | ≥12.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ15.0 | ≥15.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ19.1 | ≥19.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ25.4 | ≥25.4 | ≤8.00 | ≥2.40 | 1.00 | 25 |
Φ30.0 | ≥30.0 | ≤10.0 | ≥2.40 | 1.00 | 25 |
Φ39.0 | ≥39.0 | ≤13.0 | ≥2.40 | 1.00 | 1.2 |
Φ50.0 | ≥50.0 | ≤19.0 | ≥2.40 | 1.00 | 1.2 |
Boholo(mm) | Joalokaha ho fanoe ka D(mm) | Ka mor'a ho hlaphoheloa ka ho feletseng (mm) | Sephutheloana se Tloaelehileng |
Bophara ba ka hare d | Botenya ba lebota w1 | Botenya ba lera la sekhomaretsi w2 | (M/Roll kapa M/PCS) |
Φ4.0 | ≥4.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ6.0 | ≥6.0 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ8.0 | ≥8.0 | ≤2.00 | ≥1.00 | 0.50 | 50 |
Φ12.0 | ≥12.0 | ≤3.00 | ≥1.40 | 0.60 | 25 |
Φ16.0 | ≥16.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ18.0 | ≥18.0 | ≤4.50 | ≥1.60 | 0.80 | 25 |
Φ20.0 | ≥19.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ24.0 | ≥24.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ32.0 | ≥32.0 | ≤8.00 | ≥2.40 | 1.00 | 1.22 |
Φ40.0 | ≥40.0 | ≤10.0 | ≥2.40 | 1.00 | 1.22 |
Φ52.0 | ≥52.0 | ≤13.0 | ≥2.40 | 1.00 | 1.22 |
Ts'ebetso ea Teknoloji ea Sekhomaretsi
Ke Hobane'ng ha U Re Khetha:
1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.
2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)
4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)
5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.
6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
Leeto la Feme
ITEANYE LE RONA
Moikarabelli:Mme Jessica Wu
Lengolo-tsoibila :sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
ADDRESS:No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, China
