DWRS-135G High Temperature Resistant Adhesive Lined Dual Wall Heat Shrink Tubing
DWRS-135G (3X) (4X) is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior sealing against water, corrosive gas, and chemicals. Typical applications include environmental sealing of in-line splices, sealing and strain relief of connectors and terminals, abrasion protection and electrical insulation of automotive wiring harness splices and valuable components, fleet & marine sealing & protection, and wire bundling, etc.
Sebopeho
Ts'ebetso ea Setsebi
Thepa | Lintlha tse tloaelehileng | Mokgwa/boemo ba teko |
Matla a tšepe | ≥13MPa | ASTM D2671 |
Elongation nakong ya khefu | ≥400% | ASTM D2671 |
Matla a thata ka mor'a ho tsofala ha mocheso | ≥11MPa | 158℃×168h |
Ho lelefatsa ka mora botsofali ba mocheso | ≥300% | 158℃×168h |
Phetoho ea longitudinal | 0~-10% | ASTM D2671 |
Ho chesa | Ho itima ka bowena ka metsotsoana e 30. | AMS-DTL-23053/5 |
Ho tšoha ha mocheso | Ha ho mapetsong, ha ho ho rotha | ASTM D2671,250℃×4h |
Matla a dielectric | ≥15kV/mm | IEC 60243 |
Ho hanyetsa molumo | ≥1014Ω.cm | IEC 60093 |
Boemo
Boholo | DJoalo ka ID(mm) e fanoeng | Ka mor'a ho hlaphoheloa ka ho feletseng (mm) | Sephutheloana se tloaelehileng | |||
mm | intshi | ID d | Botenya ba lebota w1 | Botenya ba sekgomaretsi w2 | (m/spool) | |
Φ3.0(3.2) | 1/8 | ≥3.0 | ≤1.0 | ≥1.00 | 0.50 | 200 |
Φ4.8 | 3/16 | ≥4.8 | ≤1.5 | ≥1.00 | 0.50 | 100 |
1/4 | ≥6.0 | ≤2.0 | ≥1.00 | 0.50 | 100 | |
Φ7.9 | 2.5/8 | ≥7.9 | ≤2.7 | ≥1.00 | 0.50 | 100 |
Φ9.0(9.5) | 3/8 | ≥9.0 | ≤3.0 | ≥1.40 | 0.60 | 50 |
Φ12.0(12.7) | 1/2 | ≥12.0 | ≤4.0 | ≥1.60 | 0.80 | 25 |
Φ19.0(19.1) | 3/4 | ≥19.0 | ≤6.0 | ≥2.10 | 0.80 | 25 |
Φ24.0(25.4) | 1 | ≥24.0 | ≤8.0 | ≥2.40 | 1.0 | 25 |
Φ40.0(39.0) | 1-1/2 | ≥40.0 | ≤13.0 | ≥2.40 | 1.0 | 25 |
Boholo | Joalo ka ID(mm) e fanoeng | Ka mor'a ho hlaphoheloa ka ho feletseng (mm) | Sephutheloana se tloaelehileng | |||
mm | intshi | ID | Botenya ba lebota | Botenya ba sekgomaretsi
| (m/spool, m/pcs) | |
Φ4.0 | 2/13 | ≥4.0 | ≤1.0 | 1.05±0.30 | 0.50±0.20 | 200 |
Φ8.0 | 5/16 | ≥8.0 | ≤2.0 | 1.55±0.30 | 0.60±0.25 | 100 |
Φ12.0 | 1/2 | ≥12.0 | ≤3.0 | 1.75±0.30 | 0.60±0.25 | 25 |
Φ16.0 | 5/8 | ≥16.0 | ≤4.0 | 2.00±0.35 | 0.70±0.30 | 25 |
Φ24.0 | 1 | ≥24.0 | ≤6.0 | 2.60±0.40 | 0.75±0.30 | 25 |
Φ32.0 | 1-1/4 | ≥32.0 | ≤8.0 | 3.00±0.50 | 0.90±0.30 | 1.22 |
Φ52.0 | 2 | ≥52.0 | ≤13.0 | 3.35±0.50 | 0.95±0.30 | 1.22 |
Ke Hobane'ng ha U Re Khetha:
1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.
2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)
4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)
5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.
6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
Leeto la Feme
ITEANYE LE RONA
Moikarabelli:Mme Jessica Wu
Lengolo-tsoibila :sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
ADDRESS:No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, China