CMSID Low Smoke and Flame Retardant Heat Shrink Identification Cable Marker Sleeve
CMSID is a halogen-free, low-smoke, highly flame retardant cable and wire identification sleeve, which is designed to meet the requirements of EMU for high-speed rails, subways, and motor train units. It is made of the polyolefin by means of bombarding and cross-lining of the high energy electron beam. Flammability, smoke density, toxicity index, electrical, physical and chemical performances conform to the standards of international motor vehicles. The printed characters are amazingly abrasion resistant, even if the words have encountered detergent or corrosion of military oil before and after shrinking. The soundness of words conforms to the requirements of SAE-AS 81531 and MIL-STD-202F/215J and keeps permanent identification.
Structure
Technical Performance
Performance | Indicators | Test Method |
Typical properties | Unit | States |
Tensile Strength | Mpa | Unaged | ≥10.3 | ASTM G 154,MIL-DTL-23053E ISO 37,500mm/min 175°C,168h,ISO 188 |
Heat aged/ After fluids/UV aged | ≥6.9 |
Elongation at break | % | Unaged | ≥200 |
Heat aged/ After fluid | ≥100 |
Secant Modulus | Mpa | Unaged | ＜173 | ASTM D 882 |
Voltage Withstand | V | Unaged / After aged | 2500V, No breakdown in 60 sec. | IEC 243,ASTM G 154 175°C,168h,ISO 188 |
Dielectric Strength | MV/m | Before aged | ≥19.7 |
Heat aged/ After fluid/ UV aged | ≥15.8 |
Volume Resistivity | Ω.cm | Unaged | ≥1014 | IEC 93 |
Dielectric constant | - | Unaged | - | ASTM 150 |
Water Absorption | - | Unaged | ≤1.0 | ASTM 570,23°C,24h |
Bare Copper Corrosion | - | Unaged | No corrosion | 23°C,Rh 95±5%,24h 175°C,16h |
Heat Shock | - | Unaged | No cracks, flowing, dripping | Wind to the specified mandrel, 225°C,4h |
Cold Flexibility | - | Unaged | No cracks | Wind to the specified mandrel, -30°C,1h |
Flammability | - | Unaged | DIN 5510, S3 | DIN 5510-2 |
Longitudinal Change | % | Unaged | 2X: -10~+1 | 200°C,Constant 3min |
3X: -15~+5 |
Smoke Density | - | Unaged | ≤0.017 | DIN 5510-2 |
Toxcity Index | - | Unaged | ≤1 | BS 6853:1999 |
Dimension
Order Description | Expanded As Supplied (mm) | Recovered After Heating (mm) |
Inner Diameter ID1 | Flatten width G | Dual Wall Thickness H | Inner DiameterID2 | Single Wall Thickness h |
CMSID-2X-1.6/ | 2.00±0.20 | 3.7±0.3 | 0.48±0.10 | ≤0.79 | 0.45±0.06 |
CMSID-2X-2.4/ | 2.79±0.20 | 5.0±0.3 | 0.48±0.10 | ≤1.18 | 0.49±0.06 |
CMSID-2X-3.2/ | 3.64±0.23 | 6.3±0.4 | 0.48±0.10 | ≤1.59 | 0.51±0.06 |
CMSID-2X-4.8/ | 5.26±0.25 | 8.9±0.4 | 0.49±0.10 | ≤2.36 | 0.54±0.06 |
CMSID-2X-6.4/ | 6.92±0.28 | 11.5±0.4 | 0.50±0.10 | ≤3.18 | 0.56±0.06 |
CMSID-2X-9.5/ | 10.2±0.32 | 16.7±0.5 | 0.51±0.11 | ≤4.75 | 0.59±0.06 |
CMSID-2X-12.7/ | 13.5±0.36 | 21.8±0.6 | 0.52±0.11 | ≤6.35 | 0.60±0.07 |
CMSID-2X-19/ | 20.1±0.40 | 32.2±0.6 | 0.53±0.11 | ≤9.53 | 0.62±0.07 |
CMSID-2X-25/ | 26.7±0.45 | 42.5±0.7 | 0.55±0.12 | ≤12.7 | 0.63±0.07 |
CMSID-2X-38/ | 39.8±0.51 | 63.2±0.8 | 0.57±0.12 | ≤19.1 | 0.64±0.07 |
CMSID-2X-51/ | 53.0±0.56 | 83.9±0.9 | 0.58±0.13 | ≤25.4 | 0.64±0.08 |
CMSID-2X-76/ | 79.4±0.56 | 125.3±1.0 | 0.59±0.13 | ≤38.1 | 0.64±0.09 |
Order Description | Expanded As Supplied(mm) | Recovered After Heating(mm) |
Internal Diameter ID1 | Flatten Width G | Dual Wall Thickness H | Inner Diameter ID2 | Single Wall Thickness h |
CMSID-3X-1.6/ | 2.00±0.20 | 3.7±0.3 | 0.47±0.10 | ≤0.53 | 0.52±0.06 |
CMSID-3X-2.4/ | 2.79±0.20 | 5.0±0.3 | 0.47±0.10 | ≤0.79 | 0.57±0.06 |
CMSID-3X-3.2/ | 3.64±0.23 | 6.3±0.4 | 0.48±0.10 | ≤1.06 | 0.61±0.06 |
CMSID-3X-4.8/ | 5.26±0.25 | 8.9±0.4 | 0.49±0.10 | ≤1.59 | 0.67±0.06 |
CMSID-3X-6.4/ | 6.92±0.28 | 11.5±0.4 | 0.50±0.10 | ≤2.36 | 0.71±0.06 |
CMSID-3X-9.5/ | 10.2±0.32 | 16.7±0.5 | 0.52±0.11 | ≤3.18 | 0.77±0.06 |
CMSID-3X-12.7/ | 13.5±0.36 | 21.8±0.6 | 0.53±0.11 | ≤4.75 | 0.80±0.07 |
CMSID-3X-19/ | 20.1±0.40 | 32.2±0.6 | 0.55±0.11 | ≤6.35 | 0.84±0.07 |
CMSID-3X-25/ | 26.7±0.45 | 42.5±0.7 | 0.56±0.12 | ≤8.47 | 0.86±0.07 |
CMSID-3X-38/ | 39.8±0.51 | 63.2±0.8 | 0.57±0.12 | ≤12.9 | 0.89±0.07 |
CMSID-3X-51/ | 53.0±0.56 | 83.9±0.9 | 0.57±0.13 | ≤17.2 | 0.90±0.08 |
CMSID-3X-76/ | 79.4±0.56 | 125.3±1.0 | 0.59±0.13 | ≤25.8 | 0.92±0.09 |
Why Choose Us:
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. e guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
Factory Tour
CONTACT US
Contact person:Ms. Jessica Wu
Email : sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
ADDRESS：No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, China
