I-DWRS-125G I-Dual Wall Flame Retardant I-Adhesive Lined Heat Shrink Tubing
I-DWRS-125G(3X)(4X) iyishubhu ye-polyolefin exhunywe ngokuphambanayo ekhishwa ngongqimba lwangaphakathi lokunamathelayo. Ungqimba lwangaphakathi lwe-adhesive, olunamandla okuvala aphakeme, luphinde lube isivikelo ngokumelene nobunzima bemishini. Amashubhu okunciphisa ukushisa odongeni okukabili aklanyelwe ukuhlinzeka ngokuvaleka okuphakeme emanzini, igesi eyonakalisayo, namakhemikhali.
Isakhiwo
Ukusebenza Kwezobuchwepheshe
Impahla | Idatha ejwayelekile | Indlela yokuhlola/isimo |
Amandla aqinile | ≥12MPa | I-ASTM D 2671 |
Ukwandisa ngesikhathi sekhefu | ≥400% | I-ASTM D 2671 |
Amandla aqinile ngemva kokuguga kokushisa | ≥11MPa | 158℃ ×168h |
Ukwelula ngemva kokuguga kokushisa | ≥350% | 158℃ ×168h |
Ushintsho lwe-longitudinal | 0~+10% | I-ASTM D 2671 |
Ukuvutha | Ukuzicisha ngokwakho kumasekhondi angama-30. | AMS-DTL-23053/4 |
Amandla e-Dielectric | ≥15kV/mm | I-IEC 60243 |
Ukumelana nevolumu | ≥1014Ω.cm | I-IEC 60093 |
Ukusebenza Kwezobuchwepheshe Kwe-Adhesive
Ukusebenza Kwezobuchwepheshe Kwe-Adhesive
Impahla | Idatha ejwayelekile | Indlela yokuhlola/isimo |
Iphuzu lokuthambisa | 95±5°C | Idatha ye-ASTM E28 |
Ukumuncwa kwamanzi | <0.5% | I-ASTM D570 |
Amandla epeel(PE) | ≥120N/25mm | I-ASTM D 1000 |
Amandla e-Peel(AI) | ≥80N/25mm | I-ASTM D 1000 |
Ukusebenza Kwezobuchwepheshe Kwe-Adhesive
Ubukhulu
Usayizi(mm) | Njengoba kunikezwe u-D(mm) | Ngemva kokululama ngokugcwele (mm) | Iphakheji Elijwayelekile |
I-diameter yangaphakathi d | Ubukhulu bodonga w1 | Ubukhulu besendlalelo sokunamathela w2 | (M/Roll noma i-M/PCS) |
Φ3.2 | ≥3.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ4.8 | ≥4.8 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ6.4 | ≥6.0 | ≤2.00 | ≥1.00 | 0.50 | 100 |
Φ7.9 | ≥7.9 | ≤2.70 | ≥1.30 | 0.50 | 100 |
Φ9.5 | ≥9.0 | ≤3.00 | ≥1.40 | 0.60 | 50 |
Φ12.7 | ≥12.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ15.0 | ≥15.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ19.1 | ≥19.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ25.4 | ≥25.4 | ≤8.00 | ≥2.40 | 1.00 | 25 |
Φ30.0 | ≥30.0 | ≤10.0 | ≥2.40 | 1.00 | 25 |
Φ39.0 | ≥39.0 | ≤13.0 | ≥2.40 | 1.00 | 1.2 |
Φ50.0 | ≥50.0 | ≤19.0 | ≥2.40 | 1.00 | 1.2 |
Usayizi(mm) | Njengoba kunikezwe u-D(mm) | Ngemva kokululama ngokugcwele (mm) | Iphakheji Elijwayelekile |
I-diameter yangaphakathi d | Ubukhulu bodonga w1 | Ubukhulu besendlalelo sokunamathela w2 | (M/Roll noma i-M/PCS) |
Φ4.0 | ≥4.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ6.0 | ≥6.0 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ8.0 | ≥8.0 | ≤2.00 | ≥1.00 | 0.50 | 50 |
Φ12.0 | ≥12.0 | ≤3.00 | ≥1.40 | 0.60 | 25 |
Φ16.0 | ≥16.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ18.0 | ≥18.0 | ≤4.50 | ≥1.60 | 0.80 | 25 |
Φ20.0 | ≥19.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ24.0 | ≥24.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ32.0 | ≥32.0 | ≤8.00 | ≥2.40 | 1.00 | 1.22 |
Φ40.0 | ≥40.0 | ≤10.0 | ≥2.40 | 1.00 | 1.22 |
Φ52.0 | ≥52.0 | ≤13.0 | ≥2.40 | 1.00 | 1.22 |
Ukusebenza Kwezobuchwepheshe Kwe-Adhesive
Kungani Usikhethe:
1. Ungathola impahla ephelele ngokuvumelana nemfuneko yakho okungenani inani elingenzeka.
2. Siphinde sinikeze ama-Reworks, i-FOB, i-CFR, i-CIF, nezintengo zokudiliva umnyango nomnyango. Siphakamisa ukuthi wenze isivumelwano sokuthunyelwa okuzokonga kakhulu.
3. Izinto esizihlinzekayo zingaqinisekiswa ngokuphelele, kusukela kusitifiketi sokuhlolwa kwempahla engavuthiwe kuya esitatimendeni sobukhulu bokugcina.(Imibiko izovela ngokwemfuneko)
4. isiqinisekiso sokunikeza impendulo phakathi namahora angu-24(imvamisa ngehora elifanayo)
5. Ungathola ezinye izindlela zesitoko, ukulethwa komshini ngokunciphisa isikhathi sokukhiqiza.
6. Sizinikele ngokugcwele kumakhasimende ethu. Uma kungeke kwenzeke ukuhlangabezana nezidingo zakho ngemva kokuhlola zonke izinketho, ngeke sikudukise ngokwenza izithembiso ezingamanga ezizodala ubudlelwano obuhle namakhasimende.
I-Factory Tour
XHUMANA NATHI
Umuntu othintwayo:UNksz Jessica Wu
I-imeyili :sales@heatshrinkmarket.com
I-WhatsApp/Wechat : 0086 -15850032094
IKHELI:No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, China
