I-DWRS-125G Dual Udonga oluNcamathisiweyo oluNcamayo oluNcamayo oluneMilayini yoBubushushu obuNcincisayo
I-DWRS-125G (3X) (4X) ityhubhu ye-polyolefin edibeneyo edibeneyo ekhutshwe kunye nomgca wangaphakathi wokunamathela. Umaleko ongaphakathi wokuncamathelisa, onobuchule obuphezulu bokutywina, ukwasisithintelo ngokuchasene noxinzelelo lomatshini. Iityhubhu zokucutha ubushushu ezindongeni ezimbini ziyilelwe ukubonelela ngokutywinwa okuphezulu kumanzi, irhasi eyonakalisayo, kunye neekhemikhali.
Ulwakhiwo
Ukusebenza kwezobuGcisa
Ipropati | Idatha eqhelekileyo | Indlela yokuvavanya / imeko |
Tensile strength | ≥12MPa | I-ASTM D 2671 |
Ukwandisa ngexesha lekhefu | ≥400% | I-ASTM D 2671 |
Amandla okuqina emva kokuguga kobushushu | ≥11MPa | 158℃ ×168h |
Ukwandisa emva kokuguga kobushushu | ≥350% | 158℃ ×168h |
Utshintsho lwexesha elide | 0~+10% | I-ASTM D 2671 |
Ukutsha | Ukuzicima kwi-30 sec. | AMS-DTL-23053/4 |
Amandla e-Dielectric | ≥15kV/mm | IEC 60243 |
Ukuxhathisa umthamo | ≥1014Ω.cm | IEC 60093 |
Ukusebenza kobuGcisa beAdhesive
Ukusebenza kobuGcisa beAdhesive
Ipropati | Idatha eqhelekileyo | Indlela yokuvavanya / imeko |
Indawo yokuthambisa | 95±5°C | I-ASTM E 28 |
Ukufunxwa kwamanzi | <0.5% | I-ASTM D 570 |
Amandla e-Peel (PE) | ≥120N/25mm | I-ASTM D 1000 |
Amandla e-Peel (AI) | ≥80N/25mm | I-ASTM D 1000 |
Ukusebenza kobuGcisa beAdhesive
Ubungakanani
Ubungakanani(mm) | Njengoko kunikezelwe uD(mm) | Emva kokuchacha ngokupheleleyo (mm) | Ipakethe esemgangathweni |
Idayimitha yangaphakathi d | Ubukhulu bodonga w1 | Ukutyeba komaleko wokuncamathelisa w2 | (M/Roll okanye M/PCS) |
Φ3.2 | ≥3.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ4.8 | ≥4.8 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ6.4 | ≥6.0 | ≤2.00 | ≥1.00 | 0.50 | 100 |
Φ7.9 | ≥7.9 | ≤2.70 | ≥1.30 | 0.50 | 100 |
Φ9.5 | ≥9.0 | ≤3.00 | ≥1.40 | 0.60 | 50 |
Φ12.7 | ≥12.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ15.0 | ≥15.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ19.1 | ≥19.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ25.4 | ≥25.4 | ≤8.00 | ≥2.40 | 1.00 | 25 |
Φ30.0 | ≥30.0 | ≤10.0 | ≥2.40 | 1.00 | 25 |
Φ39.0 | ≥39.0 | ≤13.0 | ≥2.40 | 1.00 | 1.2 |
Φ50.0 | ≥50.0 | ≤19.0 | ≥2.40 | 1.00 | 1.2 |
Ubungakanani(mm) | Njengoko kunikezelwe uD(mm) | Emva kokuchacha ngokupheleleyo (mm) | Ipakethe esemgangathweni |
Idayimitha yangaphakathi d | Ubunzima bodonga w1 | Ukutyeba komaleko wokuncamathelisa w2 | (M/Roll okanye M/PCS) |
Φ4.0 | ≥4.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ6.0 | ≥6.0 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ8.0 | ≥8.0 | ≤2.00 | ≥1.00 | 0.50 | 50 |
Φ12.0 | ≥12.0 | ≤3.00 | ≥1.40 | 0.60 | 25 |
Φ16.0 | ≥16.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ18.0 | ≥18.0 | ≤4.50 | ≥1.60 | 0.80 | 25 |
Φ20.0 | ≥19.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ24.0 | ≥24.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ32.0 | ≥32.0 | ≤8.00 | ≥2.40 | 1.00 | 1.22 |
Φ40.0 | ≥40.0 | ≤10.0 | ≥2.40 | 1.00 | 1.22 |
Φ52.0 | ≥52.0 | ≤13.0 | ≥2.40 | 1.00 | 1.22 |
Ukusebenza kobuGcisa beAdhesive
Kutheni Ukhetha Thina:
1. Unokufumana izinto ezigqibeleleyo ngokwemfuno yakho ngexabiso elincinci elinokwenzeka.
2. Sikwabonelela ngeeReworks, FOB, CFR, CIF, kunye namaxabiso okuhanjiswa kwendlu ukuya emnyango. Sicebisa ukuba wenze isivumelwano sokuthumela ngenqanawe okuya kuba nokonga kakhulu.
3. Izinto esizibonelelayo zingqinisiseka ngokupheleleyo, ukusuka kwisatifikethi sovavanyo lwemathiriyeli ekrwada ukuya kwisiteyitimenti somgangatho wokugqibela.(Iingxelo ziya kubonisa ngokwemfuneko)
4. isiqinisekiso sokunika impendulo kwiiyure ezingama-24(ngokuqhelekileyo ngeyure enye)
5. Unokufumana ezinye iindlela zesitokhwe, ukuhanjiswa kwelitye kunye nokunciphisa ixesha lokuvelisa.
6. Sizinikezele ngokupheleleyo kubathengi bethu. Ukuba akunakwenzeka ukuhlangabezana neemfuno zakho emva kokuvavanya zonke iinketho, asiyi kukukhohlisa ngokwenza izithembiso zobuxoki eziza kudala ubudlelwane obuhle kubathengi.
UKhenketho lwasefektri
QHAGAMSHELANA NATHI
Umntu woqhagamshelo:UNksz Jessica Wu
I-imeyile :sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
Idilesi:No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, China
