TWRS-125YG Tubi għat-Tiċken tas-Sħana Stripped Ħajt Irqiq Isfar Aħdar
TWRS-125YG huwa magħmul permezz ta 'ko-estrużjoni ta' żewġ lottijiet prinċipali kkuluriti differenti fformulati apposta ta 'polyolefin u proċess ta' cross-linking ta 'irradjazzjoni b'aċċeleraturi elettroniċi. Applikazzjonijiet tipiċi jinkludu l-identifikazzjoni tal-wajer tad-dinja jew kejbils u wajers speċjali oħra.
Struttura
Prestazzjoni Teknika
Proprjetajiet | Data Tipika | Metodi/kundizzjonijiet tat-test |
Saħħa tat-tensjoni | ≥10.4MPa | ASTM D 2671 |
Titwil | ≥300% | ASTM D 2671 |
Saħħa tat-tensjoni wara tixjiħ bis-sħana | ≥7.3MPa | 158℃×168h |
Titwil wara tixjiħ bis-sħana | ≥100% | 158℃×168h |
Bidla lonġitudinali | -8%～+8% | ASTM D 2671 |
Fjammabilità | VW-1 | ASTM D 2671 C |
Reżistu għall-vultaġġ (vultaġġ nominali 600V) | 2500V，1min, l-ebda waqfien | UL 224 |
Xokk tas-sħana | Ebda xquq，ebda taqtir | UL 224，250℃×4h |
Saħħa dielettrika | ≥15kV/mm | ASTM D 149 |
Reżistività tal-volum | ≥1014Ω.ċm | IEC 60093 |
Dimensjoni
Daqs (mm) | Kif ipprovdut D(mm) | Wara l-irkupru sħiħ (mm) | Pakkett Standard (M/Roll) |
Dijametru intern d | Ħxuna tal-ħajt w |
φ1.0/0.70 | 1.5±0.3 | ≤0.70 | 0.28±0.10 | 200 |
φ1.5/0.90 | 2.0±0.3 | ≤0.90 | 0.30±0.10 | 200 |
φ2.0/1.00 | 2.5±0.3 | ≤1.00 | 0.35±0.10 | 200 |
φ2.5/1.30 | 3.0±0.3 | ≤1.30 | 0.36±0.10 | 200 |
φ3.0/1.50 | 3.5±0.4 | ≤1.50 | 0.38±0.10 | 200 |
φ3.5/1.80 | 4.0±0.4 | ≤1.80 | 0.40±0.10 | 200 |
φ4.0/2.00 | 4.5±0.4 | ≤2.00 | 0.45±0.10 | 200 |
φ4.5/2.30 | 5.0±0.4 | ≤2.30 | 0.45±0.10 | 100 |
φ5.0/2.50 | 5.5±0.4 | ≤2.50 | 0.45±0.10 | 100 |
φ6.0/3.00 | 6.5±0.4 | ≤3.00 | 0.50±0.10 | 100 |
φ7.0/3.50 | 7.5±0.4 | ≤3.50 | 0.50±0.10 | 100 |
φ8.0/4.00 | 8.5±0.5 | ≤4.00 | 0.55±0.10 | 100 |
φ9.0/4.50 | 9.5±0.5 | ≤4.50 | 0.55±0.10 | 100 |
φ10/5.00 | 10.5±0.5 | ≤5.00 | 0.55±0.10 | 100 |
φ11/5.50 | 11.5±0.5 | ≤5.50 | 0.60±0.10 | 100 |
φ12/6.00 | 12.5±0.5 | ≤6.00 | 0.60±0.10 | 100 |
φ13/6.50 | 13.5±0.5 | ≤6.50 | 0.60±0.10 | 100 |
φ14/7.00 | 14.5±0.5 | ≤7.00 | 0.65±0.10 | 100 |
φ15/7.50 | 15.5±0.6 | ≤7.50 | 0.70±0.10 | 100 |
φ16/8.00 | 16.5±0.6 | ≤8.00 | 0.70±0.10 | 100 |
φ17/8.50 | 17.5±0.6 | ≤8.50 | 0.70±0.10 | 100 |
φ18/9.00 | 19.0±0.7 | ≤9.00 | 0.70±0.15 | 100 |
φ20/10.0 | 22.0±0.7 | ≤10.0 | 0.75±0.15 | 100 |
φ22/11.0 | 24.0±0.7 | ≤11.0 | 0.80±0.15 | 100 |
φ25/12.5 | 26.0±0.7 | ≤12.5 | 0.90±0.15 | 50 |
φ28/14.0 | 29.0±0.7 | ≤14.0 | 0.90±0.15 | 50 |
φ30/15.0 | 31.5±0.7 | ≤15.0 | 0.95±0.15 | 50 |
φ35/17.5 | 36.5±0.7 | ≤17.5 | 0.95±0.15 | 50 |
φ40/20.0 | 41.5±0.7 | ≤20.0 | 1.00±0.20 | 50 |
Φ45/22.5 | 46.0±0.7 | ≤22.5 | 1.00±0.20 | 25 |
φ50/25.0 | 51.0±0.7 | ≤25.0 | 1.00±0.20 | 25 |
φ60/30.0 | ≥60.0 | ≤30.0 | 1.10±0.20 | 25 |
φ70/35.0 | ≥70.0 | ≤35.0 | 1.20±0.20 | 25 |
φ80/40.0 | ≥80.0 | ≤40.0 | 1.30±0.20 | 25 |
φ90/45.0 | ≥90.0 | ≤45.0 | 1.50±0.20 | 25 |
φ100/50.0 | ≥100.0 | ≤50.0 | 1.65±0.20 | 25 |
φ120/60.0 | ≥120.0 | ≤60.0 | 1.70±0.20 | 15 |
φ150/75.0 | ≥150.0 | ≤75.0 | 1.70±0.20 | 15 |
φ180/90.0 | ≥180.0 | ≤90.0 | 1.75±0.20 | 15 |
Għaliex Agħżilna:
1. Tista 'tikseb il-materjal perfett skond il-ħtieġa tiegħek bl-inqas prezz possibbli.
2. Noffru wkoll Reworks, FOB, CFR, CIF, u prezzijiet tal-kunsinna bieb bieb. Nissuġġerixxu li tagħmel ftehim għat-tbaħħir li se jkun pjuttost ekonomiku.
3. Il-materjali li nipprovdu huma kompletament verifikabbli, sa minn ċertifikat tat-test tal-materja prima sad-dikjarazzjoni dimensjonali finali. (Ir-rapporti se juru fuq il-ħtieġa)
4. e garanzija li tagħti tweġiba fi żmien 24 siegħa (ġeneralment fl-istess siegħa)
5. Tista 'tikseb alternattivi ta' stokk, kunsinni tal-mitħna b'minimizzazzjoni tal-ħin tal-manifattura.
6. Aħna ddedikati bis-sħiħ lill-klijenti tagħna. Jekk ma jkunx possibbli li tissodisfa r-rekwiżiti tiegħek wara li neżaminaw l-għażliet kollha, aħna mhux se nqarrquk billi nagħmlu wegħdiet foloz li joħolqu relazzjonijiet tajba mal-klijenti.
Tour tal-Fabbrika
IKKUNTATJANA
Persuna ta' kuntatt:Is-Sinjura Jessica Wu
Email :sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
INDIRIZZ:No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, China
