MWDJ-125G Mwayen Mi Adezif Alinyen Tib Retresi Chalè
MWDJ-125G (3.5X) Mwayen miray adezif-aliyen chalè retresi tib se te fè nan polyolefin ignifuge flanm dife èkstrude ak yon kouch adezif cho fonn andedan. Pwodwi a fèt espesyalman pou bay pwoteksyon izolasyon pou koneksyon mwayen ak ba vòltaj mwayen kab, revokasyon, ak divès kalite ba otobis ak lòt rezon ki reziste korozyon, imidite-prèv, ak sele.
Estrikti
Pèfòmans teknik
Pwopriyete | Done tipik | Metòd tès |
Fòs rupture | ≥14MPa | ASTM D 2671 |
Elongasyon | ≥400% | ASTM D 2671 |
Fòs rupture apre aje chalè | ≥12MPa | 158℃×168h |
Elongasyon apre aje chalè | ≥300% | 158℃×168h |
Chanjman Longitudinal | 0～-10% | ASTM D 2671 |
Enflamabilite | Oto-extenn nan 30 sec. | UL224 |
Dyelèktrik fòs | ≥18kV/mm | IEC 60243 |
Volim rezistans | ≥1013Ω.cm | IEC 60093 |
Dimansyon
Gwosè (mm) | Jan yo bay D (mm) | Apre rekiperasyon konplè (mm) | Pake estanda |
ID d | Epesè miray w | (M/PCS) |
Φ8.0/2.0 | ≥8.0 | ≤2.00 | ≥1.7 | 1.00～1.50 |
Φ9.0/3.0 | ≥9.0 | ≤3.00 | ≥1.8 | 1.00～1.50 |
Φ12.0/3.0 | ≥12.0 | ≤3.00 | ≥1.8 | 1.00～1.50 |
Φ16.0/5.0 | ≥16.0 | ≤5.00 | ≥2.0 | 1.00～1.50 |
Φ19.0/5.0 | ≥19.0 | ≤5.00 | ≥2.2 | 1.00～1.50 |
Φ22.0/6.0 | ≥22.0 | ≤6.00 | ≥2.2 | 1.00～1.50 |
Φ28.0/6.0 | ≥28.0 | ≤6.00 | ≥2.5 | 1.00～1.50 |
Φ33.0/8.0 | ≥33.0 | ≤8.00 | ≥2.5 | 1.00～1.50 |
Φ40.0/12.0 | ≥40.0 | ≤12.0 | ≥2.5 | 1.00～1.50 |
Φ45.0/12.0 | ≥45.0 | ≤12.0 | ≥2.5 | 1.00～1.50 |
Φ55.0/16.0 | ≥55.0 | ≤16.0 | ≥2.7 | 1.00～1.50 |
Φ65.0/19.0 | ≥65.0 | ≤19.0 | ≥2.8 | 1.00～1.50 |
Φ75.0/22.0 | ≥75.0 | ≤22.0 | ≥3.0 | 1.00～1.50 |
Φ85.0/25.0 | ≥85.0 | ≤25.0 | ≥3.0 | 1.00～1.50 |
Φ95.0/30.0 | ≥95.0 | ≤30.0 | ≥3.0 | 1.00～1.50 |
Φ115.0/34.0 | ≥115.0 | ≤34.0 | ≥3.3 | 1.00～1.50 |
Φ140.0/42.0 | ≥140.0 | ≤42.0 | ≥3.5 | 1.00～1.50 |
Φ160.0/50.0 | ≥160.0 | ≤50.0 | ≥3.5 | 1.00～1.50 |
Φ180.0/58.0 | ≥180.0 | ≤58.0 | ≥3.5 | 1.00～1.50 |
Φ205.0/65.0 | ≥205.0 | ≤65.0 | ≥3.5 | 1.00～1.50 |
Φ235.0/65.0 | ≥235.0 | ≤65.0 | ≥3.7 | 1.00～1.50 |
Φ265.0/75.0 | ≥265.0 | ≤75.0 | ≥4.0 | 1.00～1.50 |
Φ300.0/85.0 | ≥300.0 | ≤85.0 | ≥4.0 | 1.00～1.50 |
Φ350.0/100.0 | ≥350.0 | ≤100.0 | ≥4.3 | 1.00～1.50 |
Φ380.0/150.0 | ≥380.0 | ≤150.0 | ≥4.3 | 1.00～1.50 |
Φ410.0/150.0 | ≥410.0 | ≤150.0 | ≥4.3 | 1.00～1.50 |
Poukisa chwazi nou:
1. Ou ka jwenn materyèl la pafè dapre egzijans ou nan pri a pi piti posib.
2. Nou ofri tou Reworks, FOB, CFR, CIF, ak pri livrezon pòt an pòt. Nou sijere ou fè kontra pou anbake ki pral byen ekonomik.
3. Materyèl nou bay yo konplètman verifye, dwa soti nan sètifika tès materyèl anvan tout koreksyon nan deklarasyon dimansyon final la. (Rapò yo pral montre sou kondisyon)
4. e garanti bay yon repons nan 24hours (anjeneral nan menm lè a)
5. Ou ka jwenn altènativ stock, livrezon moulen ak minimize tan fabrikasyon.
6. Nou konplètman dedye a kliyan nou yo. Si li pa pral posib satisfè kondisyon ou apre yo fin egzamine tout opsyon, nou pa pral twonpe ou lè nou fè fo pwomès ki pral kreye bon relasyon kliyan.
Faktori Tour
KONTAKTE NOU
Moun pou kontakte:Madam Jessica Wu
Imèl :sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
ADRÈS:No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, Lachin
